Angel LCD/ LED "Equalizer"
Pro Delrin Bolt
-
Actual field tests
show an increase in velocity of 10-25+ FPS over stock, 7-10 FPS over
after market bolts
-
The increased efficiency
gives you
many more shots per tank
-
The "Equalizer"
chamber between the bolt and the ball is designed to displace the
air pressure over the whole back surface of the ball with the increased
volume area, not just 6 holes
-
High flow design with
an ultra smooth surface finish. Milled grove for ball detent
-
This Delrin bolt is
one of the lightest you will find, only 15.1gr
versus 19.2 stock and for the LCD 11.2gr
versus 14.65gr stock for the LED. This would allow faster cycling
due to less inertia
-
Improves Angel accuracy
while providing a quieter and steadier shot
-
Also, don't be surprised
when you go chrono and the alarm sounds, you'll be shooting hot
Patent Pend
Fits all Angel LCD/ LED's, LCD model shown.
|
Angel IR3 & Speed "Equalizer"
Pro Delrin Bolt
Yeah, your right. We took
our ultra popular Impulse profile and revised it for the Angel guys.
Does it work? you bet., Just ask around to people who have the bolt.
Better yet, have a new Speed? If so look at the bolt. There's just no
hiding that our intake port and port profile are the sleekest, best
performing combinations available.
-
Actual field tests
show an increase in velocity of 12-27+ FPS over stock, 8-15 FPS
over some after market bolts
-
Specific sections
on the bolt are slightly smaller to decrease even more friction.
Look closely...
-
Increased efficiency
giving many more shots per tank
-
The "Equalizer"
chamber between the bolt and the ball is designed to displace the
air pressure over the whole back surface of the ball with the increased
volume area, not just 6 holes
-
Angled air inlet
port for the best possible air flow, efficiency with less turbulence
-
High flow design
with an ultra smooth surface finish. Milled grove for both ball
detent and eye
-
Improves Angel accuracy
while providing a quieter and steadier shot
-
Oh, don't be surprised
when you go chrono and the alarm sounds, cuz you'll be shooting
hot
Patent Pend
Fits Angel LCD/ IR3 & Speed
|
Angel IR3/ LCD ASA Adapter
w/ Gauge Port
With the requests we've
been getting, we just had to finish them up. So here they are. These
new adapters have a built in gauge port. This feature allows you to
install a gauge so you know what your input pressure is set at. Now
your able to see if your regulator is doing anything funky.
-
Comes with drop in
dowl pin for LCD, either way, we got you covered with one adapter
-
Left side gauge port
-
Adds unique custom
styling for that finishing touch
- Superior anodized finishes, just like
all our other products
-
Comes complete with
O-ring, dowl pin, gauge not included
|
